Bearing clearance on mains with BM aluminum block

Print Thread

Re: Bearing clearance on mains with BM aluminum block [Re: mopar dave] #3093698 11/12/22 12:57 PM 11/12/22 12:57 PM
Joined: Oct 2007 Posts: 4,206 New York polyspheric master
polyspheric master Joined: Oct 2007 Posts: 4,206 New York	The rods and crank are both steel, aluminum has nothing to do with it. .003" is too loose for the rods, .0025" Boffin Emeritus

Entire Thread
Subject	Posted By	Posted
Bearing clearance on mains with BM aluminum block	mopar dave	11/12/22 01:18 PM
Re: Bearing clearance on mains with BM aluminum block	sr4440	11/12/22 01:42 PM
Re: Bearing clearance on mains with BM aluminum block	jwb123	11/12/22 01:47 PM
Re: Bearing clearance on mains with BM aluminum block	mopar dave	11/12/22 01:51 PM
Re: Bearing clearance on mains with BM aluminum block	Cab_Burge	11/12/22 06:12 PM
Re: Bearing clearance on mains with BM aluminum block	mopar dave	11/12/22 09:18 PM
Re: Bearing clearance on mains with BM aluminum block	Cab_Burge	11/13/22 01:44 AM
Re: Bearing clearance on mains with BM aluminum block	mopar dave	11/13/22 02:02 PM
Re: Bearing clearance on mains with BM aluminum block	440Jim	11/13/22 02:50 PM
Re: Bearing clearance on mains with BM aluminum block	mopar dave	11/12/22 01:49 PM
Re: Bearing clearance on mains with BM aluminum block	polyspheric	11/12/22 04:57 PM
Re: Bearing clearance on mains with BM aluminum block	6PKRTSE	11/12/22 05:09 PM
Re: Bearing clearance on mains with BM aluminum block	BigDaddy440	11/14/22 07:42 AM
Re: Bearing clearance on mains with BM aluminum block	B1MAXX	11/14/22 12:28 PM
Re: Bearing clearance on mains with BM aluminum block	an8sec70cuda	11/14/22 01:39 PM
Re: Bearing clearance on mains with BM aluminum block	dvw	11/14/22 01:53 PM
Re: Bearing clearance on mains with BM aluminum block	challenger451ci	11/14/22 05:30 PM
Re: Bearing clearance on mains with BM aluminum block	Al_Alguire	11/14/22 05:43 PM

Hop To