Originally Posted by B1MAXX
Is the bushing you are having trouble with the Ford bushing? Or are you turning out the Chrysler bushing, and contemplating the Ford as an upgrade?


I have walked out one of each. The Ford bushing is being used again as it removed a little bit of freeplay in the yoke. The intention there was to keep runout to an absolute minimum. I don't like the lack of groove, but the teflon and the additional feeds ought to offset that.

11.33 @ 118.46 on motor
10.75 @ 125.35 w/ a little spray
Now, high Speed Open Road Racing - Silver State Classic Challenge, Nevada Open Road Challenge, Big Bend Open Road Race
Rocky Mountain Race Week 2020, 2022 2.0, Sick Week 2023