4.375 bore 440 piston ring choice - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 4.375 bore 440 piston ring choice

Print Thread

Re: 4.375 bore 440 piston ring choice [Re: moparacer] #3076796 09/13/22 06:04 AM 09/13/22 06:04 AM
Joined: Mar 2003 Posts: 9,108 Rogue River, OR Jeremiah master
Jeremiah master Joined: Mar 2003 Posts: 9,108 Rogue River, OR	For a 200 shot I'd run hellfire in 1/16-1/6-3/16 grooves and Mahle GNS if using 1.5-1.5-3.0mm Burr on the ring? Lock coming out? Can you catch the horizontal scratches with a finger nail?

Entire Thread
Subject	Posted By	Posted
4.375 bore 440 piston ring choice	8urvette	09/12/22 03:37 AM
Re: 4.375 bore 440 piston ring choice	Cab_Burge	09/12/22 04:30 AM
Re: 4.375 bore 440 piston ring choice	CSK	09/12/22 05:27 PM
Re: 4.375 bore 440 piston ring choice	AndyF	09/12/22 06:13 PM
Re: 4.375 bore 440 piston ring choice	8urvette	09/13/22 02:40 AM
Re: 4.375 bore 440 piston ring choice	moparacer	09/13/22 03:34 AM
Re: 4.375 bore 440 piston ring choice	Jeremiah	09/13/22 10:04 AM
Re: 4.375 bore 440 piston ring choice	8urvette	09/13/22 01:36 PM
Re: 4.375 bore 440 piston ring choice	Jeremiah	09/13/22 02:03 PM
Re: 4.375 bore 440 piston ring choice	fast68plymouth	09/13/22 03:19 PM
Re: 4.375 bore 440 piston ring choice	AndyF	09/13/22 04:18 PM
Re: 4.375 bore 440 piston ring choice	Gabby63	09/13/22 03:34 PM
Re: 4.375 bore 440 piston ring choice	Cab_Burge	09/14/22 07:31 AM
Re: 4.375 bore 440 piston ring choice	8urvette	09/14/22 01:33 PM
Re: 4.375 bore 440 piston ring choice	GomangoCuda	09/14/22 06:03 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1