Originally Posted by 6PakBee
Originally Posted by autoxcuda
Originally Posted by 6PakBee
This is how the AMC guys do it.

RANCO valve rebuild



Need to be a member to access that page ;(

Do you have a screenshot from there of what the basic Ranco looks like?


Didn't realize that. It sucks. But moving ahead, here is one AMC version of the Ranco valve. And as you surmised, they are pretty much the same other than the brackets. So that is for the most part what a "rebuild" consists of, moving the brackets.




Are the rubber parts the DMT sells are for if you take your original valve unit apart?

I found that new four seasons 74661 unit in gold cad. Looks like the stock unit.

Anytime you have two different places or even batches of gold cad done, often time they don't match 100%. Because these parts are connected, any differences will stand out more. That's if it matters to you. Point is, I can see the value of rebuilding your old one with the DMT parts.


[Linked Image]


Last edited by autoxcuda; 08/13/22 11:38 AM.