Crane Cam F-288/4134-6 - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Crane Cam F-288/4134-6

Print Thread

Re: Crane Cam F-288/4134-6 [Re: reknapp52] #3048212 06/06/22 09:08 AM 06/06/22 09:08 AM
Joined: Jan 2003 Posts: 4,080 Shelby Twp. Mi HardcoreB master
HardcoreB master Joined: Jan 2003 Posts: 4,080 Shelby Twp. Mi	How did the testing go with the ICL at 104? Is this a FLAT-TAPPET cam? What heads/rockers etc? What's the motor combo?

Entire Thread
Subject	Posted By	Posted
Crane Cam F-288/4134-6	reknapp52	05/29/22 08:33 PM
Re: Crane Cam F-288/4134-6	pittsburghracer	05/29/22 09:07 PM
Re: Crane Cam F-288/4134-6	reknapp52	05/29/22 11:21 PM
Re: Crane Cam F-288/4134-6	AndyF	05/29/22 11:43 PM
Re: Crane Cam F-288/4134-6	reknapp52	05/30/22 03:50 AM
Re: Crane Cam F-288/4134-6	Cab_Burge	05/30/22 05:29 AM
Re: Crane Cam F-288/4134-6	rb446	05/30/22 09:52 AM
Re: Crane Cam F-288/4134-6	Cab_Burge	05/30/22 06:35 PM
Re: Crane Cam F-288/4134-6	pittsburghracer	05/30/22 06:41 PM
Re: Crane Cam F-288/4134-6	Cab_Burge	05/30/22 06:45 PM
Re: Crane Cam F-288/4134-6	reknapp52	05/30/22 07:12 PM
Re: Crane Cam F-288/4134-6	Cab_Burge	05/30/22 08:30 PM
Re: Crane Cam F-288/4134-6	reknapp52	05/30/22 09:23 PM
Re: Crane Cam F-288/4134-6	fast68plymouth	05/30/22 09:47 PM
Re: Crane Cam F-288/4134-6	AndyF	05/30/22 10:38 PM
Re: Crane Cam F-288/4134-6	reknapp52	05/31/22 05:12 AM
Re: Crane Cam F-288/4134-6	DrCharles	06/01/22 03:23 AM
Re: Crane Cam F-288/4134-6	reknapp52	06/01/22 04:26 AM
Re: Crane Cam F-288/4134-6	fast68plymouth	06/01/22 03:09 PM
Re: Crane Cam F-288/4134-6	reknapp52	06/01/22 07:06 PM
Re: Crane Cam F-288/4134-6	HardcoreB	06/06/22 01:08 PM
Re: Crane Cam F-288/4134-6	reknapp52	06/06/22 08:17 PM
Re: Crane Cam F-288/4134-6	fast68plymouth	06/06/22 08:35 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1