Originally Posted by Mr PotatoHead
There are howards edm on ebay but spendy. Also comp std. solid and edms.

All in the $275 to $350 area.

EDM lifters were made and designed to be used in BB Chevy motors due to their poor lubrication of the lifters and cam lobes and tight lifter to lifter bore clearances: work: scope
Every BB Mopar I've check the lifter bores on have a BUNCH of lifter to lifter bore clearances scope
I've primed more than one BB,SB and Gen 2 426 C.I. hemi motors with the lifter gallery expose, they flat push a lot of oil out around the lifters under pressure scope
My message is we don't need EDM lifters, use a good oil high in Zinc content instead to make the cam and lifters live up twocents

Last edited by Cab_Burge; 06/02/22 10:47 PM.
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)