How close is too close. - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech How close is too close.

Print Thread

Re: How close is too close. [Re: 440Jim] #3046664 05/31/22 07:54 AM 05/31/22 07:54 AM
Joined: Jan 2003 Posts: 4,050 Shelby Twp. Mi HardcoreB master
HardcoreB master Joined: Jan 2003 Posts: 4,050 Shelby Twp. Mi	Originally Posted by 440Jim Originally Posted by rebel ... the edge of ghe fave face only misses the valve pocket side wall by 0.045. Would you consider that too close? Maybe I should advance the cam half a degree? Whats your call? I would just chamfer (bevel) the top edge of the valve relief to give insurance against piston rocking. X2!

Entire Thread
Subject	Posted By	Posted
How close is too close.	rebel	05/29/22 08:50 AM
Re: How close is too close.	moparacer	05/29/22 11:54 AM
Re: How close is too close.	DavidDean	05/29/22 02:04 PM
Re: How close is too close.	dvw	05/29/22 02:27 PM
Re: How close is too close.	440Jim	05/29/22 03:02 PM
Re: How close is too close.	Mr PotatoHead	05/29/22 05:44 PM
Re: How close is too close.	Stanton	05/29/22 10:46 PM
Re: How close is too close.	rebel	05/30/22 03:13 AM
Re: How close is too close.	INTMD8	05/30/22 04:07 AM
Re: How close is too close.	BigDaddy440	05/30/22 05:59 AM
Re: How close is too close.	rebel	05/30/22 10:56 AM
Re: How close is too close.	B1MAXX	05/30/22 12:08 PM
Re: How close is too close.	Cab_Burge	05/30/22 06:40 PM
Re: How close is too close.	HardcoreB	05/31/22 11:54 AM
Re: How close is too close.	340Cuda	05/29/22 05:28 PM
Re: How close is too close.	Cab_Burge	05/30/22 05:11 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1