Originally Posted by mshred
Originally Posted by Jousi
Originally Posted by mshred
Originally Posted by Jousi
Did you check FAST throttle body adapters? I have their 92mm Big Mouth cable driven throttle body and adapter plate on my engine, 2005 truck intake.


Do you have a picture? Or a part number for the adapter? Pm me or email me the photos if easier....I looked up and down for something that could work and the only adapter I found says not compatible for 03-05 trucks. Unless this is just a throttle body that you bolted right up that didn't require an adapter?

Also, what did you do for a throttle cable setup?



I checked the F.A.S.T webshop, but seems like they don´t sell anymore full EFI kits for pre Eagle Hemi´s, but this is the same one which came in the kit with throttle body:
http://www.westcoastoffshore.ca/FAS...-5761l-Hemi-92mm-Only-112001-P10189.aspx
My assembly happend at 2010, so no invoice or part number left to confirm... It might be that I had to trim the bottom of the adapter for just a bit.
Here are couple links for the pictures:


https://photos.app.goo.gl/NL74J8UtemeWsQsc6

https://photos.app.goo.gl/doMoSrBte5cQdtDD7

https://photos.app.goo.gl/E399LjLEf5buQdpq6


Thank you for the pics! Did you fab up that throttle cable bracket yourself on the manifold?

It looks like the throttle body part number on yours doesn't exist anymore. FAST does sell this, which they say works well for factory hemi intake manifolds. I may have to contact them to see if it works even on the truck manifold. Otherwise its adapter and then an LS throttle body for me.

https://www.fuelairspark.com/chrysler-hemi-big-mouth-lt-87mm-throttle-body-w-iac-tps.html

Looks like I will be taking the intake off my core motor to get it on the bench and see whats going on with it shortly.


Yes, cable is just some random junkyard (Toyota?) part and bracket also. Good luck for your quest and project!