Old Index vertical mill parts

Print Thread

Re: Old Index vertical mill parts [Re: DAYCLONA] #3026457 03/22/22 04:44 PM 03/22/22 04:44 PM
Joined: Jan 2003 Posts: 6,444 Abilene, Texas F fastmark OP master
fastmark OP master F Joined: Jan 2003 Posts: 6,444 Abilene, Texas	The table feed motor plate says 220/440 but I can’t find the phase because it’s painted over. I’m assuming that it’s 3 phase.

Entire Thread
Subject	Posted By	Posted
Old Index vertical mill parts	fastmark	03/10/22 09:29 PM
Re: Old Index vertical mill parts	cudaman1969	03/10/22 11:32 PM
Re: Old Index vertical mill parts	EWJ	03/11/22 12:55 AM
Re: Old Index vertical mill parts	fastmark	03/11/22 05:27 PM
Re: Old Index vertical mill parts	cudaman1969	03/11/22 06:32 PM
Re: Old Index vertical mill parts	360view	03/11/22 01:03 PM
Re: Old Index vertical mill parts	Hugh Jorgan	03/11/22 02:43 PM
Re: Old Index vertical mill parts	moparx	03/11/22 05:05 PM
Re: Old Index vertical mill parts	EWJ	03/14/22 04:05 AM
Re: Old Index vertical mill parts	crackedback	03/12/22 01:38 AM
Re: Old Index vertical mill parts	Uberpube	03/13/22 12:20 AM
Re: Old Index vertical mill parts	John_Kunkel	03/13/22 09:41 PM
Re: Old Index vertical mill parts	Uberpube	03/17/22 01:17 AM
Re: Old Index vertical mill parts	John_Kunkel	03/11/22 07:56 PM
Re: Old Index vertical mill parts	pittsburghracer	03/11/22 08:48 PM
Re: Old Index vertical mill parts	feets	03/18/22 07:44 PM
Re: Old Index vertical mill parts	fastmark	03/20/22 11:36 AM
Re: Old Index vertical mill parts	moparx	03/20/22 03:12 PM
Re: Old Index vertical mill parts	feets	03/20/22 03:25 PM
Re: Old Index vertical mill parts	Sniper	03/20/22 03:28 PM
Re: Old Index vertical mill parts	fastmark	03/22/22 10:14 AM
Re: Old Index vertical mill parts	feets	03/23/22 07:14 PM
Re: Old Index vertical mill parts	DAYCLONA	03/22/22 01:09 PM
Re: Old Index vertical mill parts	fastmark	03/22/22 08:44 PM
Re: Old Index vertical mill parts	cudaman1969	03/23/22 01:39 PM
Re: Old Index vertical mill parts	fastmark	03/24/22 12:22 AM
Re: Old Index vertical mill parts	DAYCLONA	03/18/22 09:09 PM
Re: Old Index vertical mill parts	Dave Watt	03/28/22 06:38 PM
Re: Old Index vertical mill parts	pittsburghracer	03/28/22 11:03 PM
Re: Old Index vertical mill parts	fastmark	03/29/22 10:16 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To