Degreeing a cam with asymmetrical lobes

Print Thread

Re: Degreeing a cam with asymmetrical lobes [Re: madscientist] #3021637 03/07/22 08:26 PM 03/07/22 08:26 PM
Joined: Jan 2007 Posts: 8,042 Mt Morris Michigan mopar dave OP master
mopar dave OP master Joined: Jan 2007 Posts: 8,042 Mt Morris Michigan	Yes, its close. Just need to check v/p clearance. I am now at truely 105* centerlined. The numbers on the card are very close. http://www.youtube.com/watch?v=aIxaesJ190U http://youtu.be/lCZAaN7fFLg

Entire Thread
Subject	Posted By	Posted
Degreeing a cam with asymmetrical lobes	mopar dave	03/07/22 08:26 PM
Re: Degreeing a cam with asymmetrical lobes	INTMD8	03/07/22 08:48 PM
Re: Degreeing a cam with asymmetrical lobes	AndyF	03/07/22 09:55 PM
Re: Degreeing a cam with asymmetrical lobes	GTS340	03/07/22 10:17 PM
Re: Degreeing a cam with asymmetrical lobes	gregsdart	03/07/22 10:22 PM
Re: Degreeing a cam with asymmetrical lobes	mopar dave	03/07/22 10:36 PM
Re: Degreeing a cam with asymmetrical lobes	mopar dave	03/07/22 10:42 PM
Re: Degreeing a cam with asymmetrical lobes	Diplomat360	03/08/22 02:40 AM
Re: Degreeing a cam with asymmetrical lobes	440Jim	03/08/22 03:07 AM
Re: Degreeing a cam with asymmetrical lobes	dvw	03/08/22 01:08 PM
Re: Degreeing a cam with asymmetrical lobes	mopar dave	03/08/22 02:37 PM
Re: Degreeing a cam with asymmetrical lobes	BSB67	03/09/22 12:13 AM
Re: Degreeing a cam with asymmetrical lobes	451Mopar	03/09/22 09:27 AM
Re: Degreeing a cam with asymmetrical lobes	B1MAXX	03/09/22 12:30 PM
Re: Degreeing a cam with asymmetrical lobes	mopar dave	03/09/22 12:50 PM
Re: Degreeing a cam with asymmetrical lobes	B1MAXX	03/09/22 05:00 PM
Re: Degreeing a cam with asymmetrical lobes	mopar dave	03/09/22 10:50 PM
Re: Degreeing a cam with asymmetrical lobes	Clanton	03/09/22 11:03 PM
Re: Degreeing a cam with asymmetrical lobes	mopar dave	03/09/22 11:15 PM
Re: Degreeing a cam with asymmetrical lobes	B1MAXX	03/10/22 01:13 AM
Re: Degreeing a cam with asymmetrical lobes	fast68plymouth	03/10/22 03:50 PM
Re: Degreeing a cam with asymmetrical lobes	mopar dave	03/10/22 04:22 PM
Re: Degreeing a cam with asymmetrical lobes	B1MAXX	03/10/22 05:03 PM
Re: Degreeing a cam with asymmetrical lobes	AndyF	03/08/22 12:12 AM
Re: Degreeing a cam with asymmetrical lobes	mopar dave	03/08/22 12:24 AM
Re: Degreeing a cam with asymmetrical lobes	madscientist	03/08/22 12:22 AM
Re: Degreeing a cam with asymmetrical lobes	mopar dave	03/08/22 12:26 AM
Re: Degreeing a cam with asymmetrical lobes	CSK	03/08/22 01:19 AM
Re: Degreeing a cam with asymmetrical lobes	fast68plymouth	03/08/22 03:26 PM
Re: Degreeing a cam with asymmetrical lobes	mopar dave	03/08/22 04:19 PM
Re: Degreeing a cam with asymmetrical lobes	mopar dave	03/09/22 12:20 AM
Re: Degreeing a cam with asymmetrical lobes	Cab_Burge	03/09/22 12:40 AM
Re: Degreeing a cam with asymmetrical lobes	440Jim	03/09/22 01:25 PM
Re: Degreeing a cam with asymmetrical lobes	CSK	03/09/22 01:18 AM
Re: Degreeing a cam with asymmetrical lobes	ZIPPY	03/07/22 10:26 PM
Re: Degreeing a cam with asymmetrical lobes	lewtot184	03/07/22 10:32 PM
Re: Degreeing a cam with asymmetrical lobes	WHITEDART	03/08/22 12:25 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To