This should work and is probably hard considering that its meant for a Torrington needle thrust roller bearing. I would also assume its ground and has a suitable surface finish.

https://www.mcmaster.com/5909K44/


This would be a second choice although the OD is a little small.

https://www.mcmaster.com/shims/material~steel/shape~ring/id~1-2/material~1074-1095-spring-steel/

AG.

Last edited by turbobitt; 03/01/22 02:09 PM.
1970 Challenger w/572 Hemi street car and my pride and joy. 1986 T-Type with 272 Stage 2 Buick V6 engine - True 8 second street car. Just updated the engine and put down 928 HP @ 35# boost to the ground on chasis dyno. 1976 Cee Bee Avenger Jet Boat - 460 Ford powered.