I bought a USCartool one from John Passman back when he was starting out.
It was priced well so grabbed it as it was not doing another car without one. Looked well made.
I never used it as my home was totaled by a Hurracane. Then surgery, followed by stage 3 cancer.
Still hope to use it one day so can not say how well it works. Was said to also be used as a front and rear Dolly by using some of the parts.
I hope someone reads this and shows what parts are used to do so.
I saw a,Whurrley Jig (SP?) Set up at a car show with a car on it.
That thing was great and worked well and have good review's. But they cost$
But you know ther would have made sure it worked well at that show
I scrapes all my uncoating, cleaned it, epoxy primed, and shotg 3 coats of sandable primer on my back on jack stands.
Wet sanding 3 coats if Slicksand.
My long time and best friend and I traded places shooting, 4 coats base as it was kinda transparent. Followed by 5 coats clear.
Sorry for the highjack thread but no way am I am doing it again without one.
My rotisserie look on jack stands and the 1st paint that went on.