Six pak Stroker #1 has the hyd cam, eagle sir rods and a cast crank with eddy heads etc. cost about $7500. Thousands of miles on the road course and no failures. Has an honest 400 rear wheel horse power. Calculation of weight and mph in the 1/4 come out at 11.99 et.

Stroker #2 not in car yet

6 paks make great power

53009180AB PILOT BEARING 11.00
P3690715 OIL PUMP DRIVE 24.10
P4120484 FUEL PUMP ECCENTRIC 21.00
53021195A A TIMING CHAIN TENSIONER 32.00
CCA-1420-16 Comp Cams ROLLER ROCKERS SUMMIT 420.00
USED 1969 340 BLOCK sonic checked SWAP MEAT 600.00
Heads e heads by shadydell 2500
Ported by shady dell 6 pak intake 375
STOKER KIT MUSCLE MOTORS 2000
Girdle 290
OIL PAN kevko 210
FREEZE PLUGS BRASS 8.00
CAM BEARINGS CLEVITE 35.00
HEAD DOWELS 2.00
DIST BUSHING 2.00
OIL PUMP DYNAGEAR 55.00
HEAD STUDS Milodon 75.00
PUSHRODS 7.455 inches 125.00
TIMING CHAIN COMPCAM TRUE ROLLER 55.00
LIFTERS COMP CAMS 170.00
INTAKE GASKETS FELPRO RACE 20.00
HEAD GASKETS FELPRO 70.00
DAMPER 275
CAM 189.00
Misc. $200.00

LABOR
CLEAN BLOCK
INSTALL MAIN STUDS/Girdle AND ALIGN HONE
MILL REAR MAIN CAP FOR SHORT STUD
BORE & HONE 0.030 WITH PLATE
SQUARE DECKS
DEBUR AND MODIFY OIL SYSTEM
ASSEMBLE ENGINE, PRIME 1000.00