Originally Posted by demon
Originally Posted by mgoblue9798
Originally Posted by demon
I did not remove the distributor.
One thing though, the engine seems to use more oil than it used to, and it will puff blue out the exhaust when restarted after it stumbles and stalls.


Ok based upon that you almost certainly have a bad intake pan gasket on the kegger. Look down the throttle body inside the intake. If you can see oil this is your problem. It will cause the motor to use oil and have a vacuum leak. Exactly what you are describing.
There are aluminum plates out there available to replace the stamped sheet metal piece on the bottom of the intake to make sure it does not leak again.

Nope, I did the intake pan gasket a year ago. Ran fine until recently

I’d check it again, they do fail. The steel pan and aluminum intake move differently from hot to cold.