Originally Posted by 70Duster
Originally Posted by 6PAX


It’s not the sending unit I’m trying to flare. It’s the fuel line where it ends near the gas tank and is connected to the sending unit by a short piece of hose.


There's absolutely no reason or advantage to using a double flare in that application. A single flare is fine. All you need is the OD of the metal line expanded slightly at the end of the line to help prevent the hose from slipping off after its clamped.

iagree

Common sense, the least common of all the senses.
Mom.

For fear of ridicule, society stifles creativity.
Ricky Valdes