Originally Posted by Dragula
Originally Posted by ric3xrt
Originally Posted by Dragula
I might have to order one of those, although, I would want to run a 4.25 crank in it if possible.


4.25 crank fits , lots of work, but it fits with the 4.20 Bore and a 4.25 crank puts you@ 471 CI



That would be a beast of a G3


So 471 cubes at 4.25 stroke and 457 cubes at 4.125 stroke seems like the realm we should be in.....Would love one with a high ram and two 4150 TBI's on it....Talked with Kyle at Dart Machinery, and he thinks it could be out early next spring is best guess. He said the plandemic really messed up the timing of the release of it, but they are still moving forward. Pricing should be inline with their other CI offerings....So its a go!

Last edited by Dragula; 07/19/21 12:39 PM.
'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk