Just finishing this project up and some of the parts were very slow to come in. This is just a basic 10.4 comp street build slated for a heavy '70 Charger with 3.55's and a 4spd. It's a 440 Source crank, Eagle H beam rods, Icon dished pistons, Comp street roller with 246 @ .050" .630" 110 LSA, Howards Hydraulic Roller lifters, Edelbrock 5090 cleaned up/VJ/Resurfaced, 383 Torker , Holley 950 XP. So far so good. Previous customer's engine was a 470 B with Maxwedge Pro-comps etc.... More horsepower but about 50lb/ft less at a much higher RPM. J.Rob