I got the splined part welded to a big body washer and drilled holed to mount on the 3 factory holes.The center shaft has 1/2" 20 thread like a lug nut so I used a shanked lug nut and cut it short to fit the center length needed and trimmed the acorn on top to fit under the steering wheel.

20171105_150739.jpg
Last edited by Clanton; 06/08/21 01:13 PM.
GOTBOOST!New improved with Victor heads.
http://www.enginelabs.com/mopar-big-bloc...t-of-necessity/