Aerospace mandrel snafu - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Aerospace mandrel snafu

Print Thread

Re: Aerospace mandrel snafu [Re: birdtracker] #2930427 06/06/21 12:19 AM 06/06/21 12:19 AM
Joined: Jul 2008 Posts: 610 Boise M Moparteacher mopar
Moparteacher mopar M Joined: Jul 2008 Posts: 610 Boise	Several manufacturers make a hex nut for 1' and 1.125: crank mandrels. Look at Jones Racing. CS-6103-A for 1.125" mandrel. CS-6103-B for 1" mandrel. Last edited by Moparteacher; 06/06/21 12:25 AM.

Entire Thread
Subject	Posted By	Posted
Aerospace mandrel snafu	birdtracker	06/05/21 03:47 PM
Re: Aerospace mandrel snafu	Sammy	06/05/21 04:29 PM
Re: Aerospace mandrel snafu	Cab_Burge	06/05/21 04:51 PM
Re: Aerospace mandrel snafu	birdtracker	06/05/21 05:31 PM
Re: Aerospace mandrel snafu	Sammy	06/05/21 08:13 PM
Re: Aerospace mandrel snafu	birdtracker	06/05/21 09:31 PM
Re: Aerospace mandrel snafu	Moparteacher	06/06/21 04:19 AM
Re: Aerospace mandrel snafu	Chargerfan68	06/06/21 05:47 AM
Re: Aerospace mandrel snafu	Sammy	06/06/21 04:48 PM
Re: Aerospace mandrel snafu	birdtracker	06/06/21 05:03 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1