Quote:

Probably a silly question, but I assume that you removed the lock rings at the back of the T-bar anchors?




Thanks but yes, that was the first thing I did.

Quote:

sometimes if the car hasn't been driven in some time the tension arms for the torsion bars rust in place. just because you loosened the bolt doesn't mean you released the tension on them. maybe check that.




Thanks, They are extremely loose and wriggle around so I don't see a problem there.

The one thing I noticed was that that the torsion bar at the rear mount looked like it was "pushed up", I'm starting to think that the reason is the front end of the car is flexed down causing it to bind some. I'm going to jack some tension off the front end as some of you have mentioned to see if that helps. I'll also shoot some WD-40 or Blaster on the bushings tap the control arm back as suggested. Probably be a few days before I can work on it again. Thanks for all the advice everyone. It very much appreciated.

Last edited by jrwoodjoe; 04/18/09 07:49 PM.