First start on the dyno - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech First start on the dyno

Print Thread

Re: First start on the dyno [Re: A727Tflite] #2910248 04/14/21 08:35 PM 04/14/21 08:35 PM
Joined: Jun 2016 Posts: 907 Washington H hemienvy super stock
hemienvy super stock H Joined: Jun 2016 Posts: 907 Washington	If you have a flat tappet cam and new rings/hone job, basically a new motor, it would seem that ring break-in has different requirements than cam break-in. So what would actually be the best method for initial running of a new motor ?

Entire Thread
Subject	Posted By	Posted
First start on the dyno	feets	04/13/21 06:56 PM
Re: First start on the dyno	JACK1440	04/13/21 07:15 PM
Re: First start on the dyno	JERICOGTX	04/13/21 07:50 PM
Re: First start on the dyno	AndyF	04/13/21 08:25 PM
Re: First start on the dyno	usp4u	04/13/21 08:54 PM
Re: First start on the dyno	sr4440	04/13/21 09:47 PM
Re: First start on the dyno	BloFish	04/14/21 12:40 AM
Re: First start on the dyno	340Cuda	04/14/21 04:19 PM
Re: First start on the dyno	A727Tflite	04/14/21 10:37 PM
Re: First start on the dyno	hemienvy	04/15/21 12:35 AM
Re: First start on the dyno	Bad340fish	04/15/21 12:52 AM
Re: First start on the dyno	feets	04/15/21 02:10 AM
Re: First start on the dyno	sr4440	04/15/21 02:11 AM
Re: First start on the dyno	madscientist	04/15/21 02:33 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1