First start on the dyno - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech First start on the dyno

Print Thread

Re: First start on the dyno [Re: 340Cuda] #2910215 04/14/21 06:37 PM 04/14/21 06:37 PM
Joined: Mar 2011 Posts: 3,089 Michigan A A727Tflite master
A727Tflite master A Joined: Mar 2011 Posts: 3,089 Michigan	Originally Posted by 340Cuda Slightly off topic but Total Seal discourages running new engines, with new rings, without a load. Actually it’s not, being a roller it doesn’t need cam break in. As for heat cycle for the valve springs, never ever had issues without doing so. Rings generally need load to break in. Never heard of any exceptions to that.

Entire Thread
Subject	Posted By	Posted
First start on the dyno	feets	04/13/21 06:56 PM
Re: First start on the dyno	JACK1440	04/13/21 07:15 PM
Re: First start on the dyno	JERICOGTX	04/13/21 07:50 PM
Re: First start on the dyno	AndyF	04/13/21 08:25 PM
Re: First start on the dyno	usp4u	04/13/21 08:54 PM
Re: First start on the dyno	sr4440	04/13/21 09:47 PM
Re: First start on the dyno	BloFish	04/14/21 12:40 AM
Re: First start on the dyno	340Cuda	04/14/21 04:19 PM
Re: First start on the dyno	A727Tflite	04/14/21 10:37 PM
Re: First start on the dyno	hemienvy	04/15/21 12:35 AM
Re: First start on the dyno	Bad340fish	04/15/21 12:52 AM
Re: First start on the dyno	feets	04/15/21 02:10 AM
Re: First start on the dyno	sr4440	04/15/21 02:11 AM
Re: First start on the dyno	madscientist	04/15/21 02:33 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1