Looking for valve spring recommendations

Print Thread

Looking for valve spring recommendations #2906037 04/04/21 09:57 AM 04/04/21 09:57 AM
Joined: Jan 2014 Posts: 142 Vermont B bracketcharger OP member
bracketcharger OP member B Joined: Jan 2014 Posts: 142 Vermont	I'm hoping to get some recommendations for valve springs. Engine is a 440 with Mopar performance 292 .509 cam, 3/8 pushrods, Hughes 1.6 rocker arms. Heads are #452 cast iron, ported and flow 276 at .540 lift. Valve guides have been cut for PC valve seats so plenty of clearance for this lift. I presently have a set of fresh Comp 911-16 springs. With the Comp springs I have plenty of room before coil bind comes into play. Wondering if the higher ratio rocker arms will require a stiffer spring. Thanks in advance for any assistance. Happy Easter

Entire Thread
Subject	Posted By	Posted
Looking for valve spring recommendations	bracketcharger	04/04/21 01:57 PM
Re: Looking for valve spring recommendations	B1MAXX	04/04/21 02:23 PM
Re: Looking for valve spring recommendations	bracketcharger	04/04/21 04:23 PM
Re: Looking for valve spring recommendations	Cab_Burge	04/04/21 04:59 PM
Re: Looking for valve spring recommendations	B1MAXX	04/04/21 05:32 PM
Re: Looking for valve spring recommendations	Cab_Burge	04/04/21 10:01 PM
Re: Looking for valve spring recommendations	B1MAXX	04/05/21 12:42 AM
Re: Looking for valve spring recommendations	polyspheric	04/04/21 08:59 PM

Hop To