'62 343 hp 383 factory jetting?

Print Thread

Re: '62 343 hp 383 factory jetting? [Re: A727Tflite] #2892779 02/24/21 05:34 PM 02/24/21 05:34 PM
Joined: Jan 2004 Posts: 8,250 fredericksburg,va C cudaman1969 master
cudaman1969 master C Joined: Jan 2004 Posts: 8,250 fredericksburg,va	Originally Posted by Transman Originally Posted by jyrki I recently built a B block using the factory inline 2x4 manifold. It will end up in a Christine clone, so it's actually a '350', but the intake manifold is the same. Had two Edelbrock AVS 500 cfm carbs on it, and took it to dyno. The A/F's were uneven from side to side, the carbs had the stock jetting. Just thought if the factory jetting/needles were biased someway like in a 426 Hemi, anyone happen to have information about the facory jetting? You have a baseline now, just work with what you have. Trying to compare OE against aftermarket, race against stock, why waste you time. What I was thinking, change the ‘jet’ that feeds the cylinder with the issue, usually in the corners Last edited by cudaman1969; 02/24/21 05:35 PM.

Hop To