The attaching screws are small Phillips-heads with a flange - shallow dome - about 1/2-5/8 long, silver in color like clear cad plating.
OEM gaskets/seals were a thin white foam, but not visible when installed, so even an adhesive-backed molding tape will work.
Spray adhesive will work for foam, or a few dabs of trim or gasket adhesive.
At the rubber seal's forward ends, and also for the vent window assy forward end at the doors, use 3M strip caulking (aka "dum-dum").
Locations are illustrated in the FSM.
Black Phillips rounded-head screws secure the front ends of the rubber seals, and also the door & quarter seals.
All these screws are #6.