Chris Straub from Straub Technologies will grind you one. The cam and lifters were upwards of $1600...He suggests running the Morel Hi Rev lifters, but there are other options. That being said, I just pulled the cam and lifters out of the freshly broken in motor to replace them with a solid roller. I'm sure it would have run well, but the negatives outweighed the positives and I didn't want to take the chance since I will be mostly using my car at the track. It is sometimes difficult to get the geometry correct when using them. Depends a lot on what you are going to use it for and how high you are going to rev it. Do your homework before spending the big money on a set and make sure they are really what you want.