Originally Posted by MR_P_BODY
Originally Posted by 300rag
Originally Posted by MR_P_BODY
The switch that I took out had 2 red wires and a black ..green(ground)


In your original post the number and colour counts don't match up with this.


This is true.. I am confused on what goes where now... both switches have a total of 4 wires
with one being green(ground)... the original switch has 2 red.. one black and the green...
the replacement one is the above pic.. I replaced this switch 20 years ago and had a issue
back then and have forgot what I did back then....Thanks guys
wave


Based on the description of the group of 3 black wires, my instinct is that this is the power feed that goes to the odd-colour screw (common), and the two single wires are the travellers between the two switches that need to be connected to the two same-colour screws. That said, the only real way to be sure is to use a meter to check.

Peter



'65 300 'vert 413/4spd
'18 Challenger R/T Shaker
'19 Durango R/T