So I bought a set of halogens with LED halos from Octane lighting. The wiring will be up upgraded and relays installed. The halos are wired separately as running lights which normally, on the early cars, are the amber lights in the bumpers. These double as the turn signals. I'm planning to do away with those so the halos will be the running lights and turn signals BUT who needs two halos flashing for a turn !! That said, I'd like to wire them in either of these two configurations:

1) both halos are on as running lights but only ONE of the pair flashes to signal a turn
OR
2) both halos are on as running lights but they flash alternately to signal a turn

Any wiring gurus out there that can tell me how to do that ?