Trying to get the idle set up and warm up enrichment set on my Terminator.
Gen 3 hemi with comp 274 cam
Duration Advertised Intake: 274
Duration Advertised Exhaust: 287
Duration @ .050" Intake: 226
Duration @ .050" Exhaust: 234
Valve Lift Intake: 0.619
Valve Lift Exhaust: 0.612
Lobe Sep. Angle: 116

Where has anyone started for idle. 850 rpm warmed up it will pull about 12.5inhg. Problem i get into is if can start up and idle fine but the minute it gets any fuel it goes full chop and surges. took it for a spin and ever time i come to a decel it dies.

Pointers on what to look at and tweak? Ive watched so many videos ive gone blue, figured someone might be of assistance.