break in oil - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer break in oil

Print Thread

Re: break in oil [Re: jlatessa] #2829718 10/07/20 11:03 AM 10/07/20 11:03 AM
Joined: Apr 2012 Posts: 80 taunton, mass. 02780 M moparthunder70 OP member
moparthunder70 OP member M Joined: Apr 2012 Posts: 80 taunton, mass. 02780	rod bearings were plstigaged... .0015/ .002 clearance...cylinders honed, new rings...right now the engine is tight as you hand crank it...I do believe this is fairly normal with new rings, etc...

Entire Thread
Subject	Posted By	Posted
break in oil	moparthunder70	10/06/20 11:43 PM
Re: break in oil	TJP	10/07/20 12:06 AM
Re: break in oil	moparthunder70	10/07/20 01:47 PM
Re: break in oil	jlatessa	10/07/20 02:24 PM
Re: break in oil	moparthunder70	10/07/20 03:03 PM
Re: break in oil	Cab_Burge	10/07/20 07:11 PM
Re: break in oil	moparthunder70	10/07/20 03:07 PM
Re: break in oil	topside	10/07/20 03:42 PM
Re: break in oil	jlatessa	10/07/20 04:32 PM
Re: break in oil	moparx	10/07/20 05:11 PM
Re: break in oil	metallicareload	10/07/20 08:35 PM
Re: break in oil	NANKET	10/07/20 06:42 PM
Re: break in oil	DrCharles	10/07/20 12:15 AM
Re: break in oil	TC@HP2	10/07/20 02:54 PM
Re: break in oil	moparthunder70	10/07/20 03:00 PM
Re: break in oil	VCODE	10/07/20 03:03 PM
Re: break in oil	calrobb2000	10/08/20 12:47 AM
Re: break in oil	rockjason	10/08/20 11:21 AM
Re: break in oil	fury4speed	10/09/20 07:45 PM
Re: break in oil	62maxwgn	10/10/20 02:26 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1