Off set grinding a cast 440 crank.

Print Thread

Re: Off set grinding a cast 440 crank. [Re: tuff440] #2805157 08/04/20 07:08 PM 08/04/20 07:08 PM
Joined: Jan 2008 Posts: 622 sing sing U unknown mopar
unknown mopar U Joined: Jan 2008 Posts: 622 sing sing	The only thing i can add to this is,, i had a hemi crank offset ground to SBC 2.1 and had the Nitriding process done. I want to say it was 7 or 8 hundred dollars, that was 30 years ago too. lol maybe just buy a new crank my friend.

Entire Thread
Subject	Posted By	Posted
Off set grinding a cast 440 crank.	tuff440	08/03/20 01:43 AM
Re: Off set grinding a cast 440 crank.	LA360	08/03/20 03:16 AM
Re: Off set grinding a cast 440 crank.	tuff440	08/03/20 01:19 PM
Re: Off set grinding a cast 440 crank.	LA360	08/04/20 12:18 AM
Re: Off set grinding a cast 440 crank.	polyspheric	08/03/20 01:51 PM
Re: Off set grinding a cast 440 crank.	gregsdart	08/03/20 02:38 PM
Re: Off set grinding a cast 440 crank.	gregsdart	11/11/22 02:29 PM
Re: Off set grinding a cast 440 crank.	67_Satellite	08/04/20 01:54 AM
Re: Off set grinding a cast 440 crank.	jwb123	08/04/20 02:27 AM
Re: Off set grinding a cast 440 crank.	tuff440	08/04/20 05:26 AM
Re: Off set grinding a cast 440 crank.	LA360	08/04/20 05:52 AM
Re: Off set grinding a cast 440 crank.	Cab_Burge	08/04/20 06:24 AM
Re: Off set grinding a cast 440 crank.	jwb123	08/04/20 01:17 PM
Re: Off set grinding a cast 440 crank.	krautrock	08/04/20 05:14 PM
Re: Off set grinding a cast 440 crank.	AndyF	08/04/20 09:37 PM
Re: Off set grinding a cast 440 crank.	Neil	08/04/20 10:06 PM
Re: Off set grinding a cast 440 crank.	AndyF	08/05/20 01:08 AM
Re: Off set grinding a cast 440 crank.	tuff440	08/05/20 02:31 AM
Re: Off set grinding a cast 440 crank.	AndyF	08/05/20 05:02 AM
Re: Off set grinding a cast 440 crank.	tuff440	08/05/20 09:56 AM
Re: Off set grinding a cast 440 crank.	LA360	08/12/20 05:12 AM
Re: Off set grinding a cast 440 crank.	526	11/09/22 06:28 PM
Re: Off set grinding a cast 440 crank.	unknown	08/04/20 11:08 PM
Re: Off set grinding a cast 440 crank.	Cab_Burge	11/09/22 06:43 PM
Re: Off set grinding a cast 440 crank.	polyspheric	11/09/22 11:33 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To