Off set grinding a cast 440 crank.

Print Thread

Re: Off set grinding a cast 440 crank. [Re: LA360] #2804841 08/04/20 02:24 AM 08/04/20 02:24 AM
Joined: Aug 2003 Posts: 43,190 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,190 Bend,OR USA	Originally Posted by LA360 Is your crank going to be weaker? Yes Is it going to matter in your application? Probably not Now can you afford the cost and failure if it doesn't stand up? I'm thinking Ma Mopar made all their BB cast cranks out of steel, not cast iron Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Entire Thread
Subject	Posted By	Posted
Off set grinding a cast 440 crank.	tuff440	08/03/20 01:43 AM
Re: Off set grinding a cast 440 crank.	LA360	08/03/20 03:16 AM
Re: Off set grinding a cast 440 crank.	tuff440	08/03/20 01:19 PM
Re: Off set grinding a cast 440 crank.	LA360	08/04/20 12:18 AM
Re: Off set grinding a cast 440 crank.	polyspheric	08/03/20 01:51 PM
Re: Off set grinding a cast 440 crank.	gregsdart	08/03/20 02:38 PM
Re: Off set grinding a cast 440 crank.	gregsdart	11/11/22 02:29 PM
Re: Off set grinding a cast 440 crank.	67_Satellite	08/04/20 01:54 AM
Re: Off set grinding a cast 440 crank.	jwb123	08/04/20 02:27 AM
Re: Off set grinding a cast 440 crank.	tuff440	08/04/20 05:26 AM
Re: Off set grinding a cast 440 crank.	LA360	08/04/20 05:52 AM
Re: Off set grinding a cast 440 crank.	Cab_Burge	08/04/20 06:24 AM
Re: Off set grinding a cast 440 crank.	jwb123	08/04/20 01:17 PM
Re: Off set grinding a cast 440 crank.	krautrock	08/04/20 05:14 PM
Re: Off set grinding a cast 440 crank.	AndyF	08/04/20 09:37 PM
Re: Off set grinding a cast 440 crank.	Neil	08/04/20 10:06 PM
Re: Off set grinding a cast 440 crank.	AndyF	08/05/20 01:08 AM
Re: Off set grinding a cast 440 crank.	tuff440	08/05/20 02:31 AM
Re: Off set grinding a cast 440 crank.	AndyF	08/05/20 05:02 AM
Re: Off set grinding a cast 440 crank.	tuff440	08/05/20 09:56 AM
Re: Off set grinding a cast 440 crank.	LA360	08/12/20 05:12 AM
Re: Off set grinding a cast 440 crank.	526	11/09/22 06:28 PM
Re: Off set grinding a cast 440 crank.	unknown	08/04/20 11:08 PM
Re: Off set grinding a cast 440 crank.	Cab_Burge	11/09/22 06:43 PM
Re: Off set grinding a cast 440 crank.	polyspheric	11/09/22 11:33 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To