Torque converter help

Print Thread

Re: Torque converter help [Re: 426lloyd] #2803666 08/01/20 11:38 AM 08/01/20 11:38 AM
Joined: Jan 2003 Posts: 25,791 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,791 Rio Linda, CA	Originally Posted by 426lloyd Ok just put a straight edge across the front and it measured exactly 1/2 inch to the face of pad , converter seems bottomed out so I should be good to go correct . The shape of the converter bowl determines when/where it bottoms out. The 1/2" drive lug dimension is all that matters. The INTERNET, the MISinformation superhighway

Hop To