727/904 nss hole size - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 727/904 nss hole size

Print Thread

Re: 727/904 nss hole size [Re: HOT IN AZ] #2803012 07/30/20 05:54 PM 07/30/20 05:54 PM
Joined: Oct 2010 Posts: 2,408 Ambridge, Pa. R rickraw top fuel
rickraw top fuel R Joined: Oct 2010 Posts: 2,408 Ambridge, Pa.	I measured the shank on n old switch, 665 thou. Thread pitch is 16. Threads are straight cut. Maybe 11/16 drill.

Entire Thread
Subject	Posted By	Posted
727/904 nss hole size	HOT IN AZ	07/30/20 07:29 PM
Re: 727/904 nss hole size	rickraw	07/30/20 09:54 PM
Re: 727/904 nss hole size	John_Kunkel	07/31/20 04:30 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1