Posted By: HOT IN AZ
727/904 nss hole size - 07/30/20 07:29 PM
Looking for the tap/die size for a 727/904 neutral safety switch. Thinking of making a shifter activated switch out of one. Micro switches are nice but seem too fragile. Thanks in advance...Rick!
Posted By: rickraw
Re: 727/904 nss hole size - 07/30/20 09:54 PM
I measured the shank on n old switch, 665 thou. Thread pitch is 16. Threads are straight cut. Maybe 11/16 drill.
Posted By: John_Kunkel
Re: 727/904 nss hole size - 07/31/20 04:30 PM
The thread is 3/4"-16 same as AN-8.