Wondering if someone could post a picture of what the correct hardware looks like that attaches the rear valance on a 70 Cuda, need the 2 along the very bottom and the 4 that run along the top edge. When I got my car almost 30 years ago the valance was off and hardware was mixed in with a box of bolts. Philips head screws were threaded in place and have been there ever since. Maybe the screws are correct but doubt it since they look like interior trim screws. A close up pic the head of the hardware as installed would be helpful.
Thanks.
'67 & '68 Barracuda FB's
'70 AAR Cuda
'89 Ramcharger 4x4
'06 Ram 2500 CTD 6 spd
...Mopars are always way out back
Between the muddy river and the rusty railroad track
Yeah, the Mopars are always hard to find
But you can always find a few
There’s Cordobas and Furys and Darts and Dusters too
There’s a Diplomat with a Swinger
A new Yorker a Demon and a Scamp
And there’s a 68 Barracuda grill with both headlamps...Slaid Cleaves - Skunk Juice
| 
