Having a problem adjusting the height of the fuel in the bowl.
I set them low and fuel goes all the way to the top. I pulled needle and seats and cleaned them. Everything seems to work correctly. Needle moves freely but when I turn on the fuel pump, the bowl fills and starts dumping some fuel into the carb flooding it out. I turn off the fuel pump and bowls drop and engine runs fine till I turn the pump back on. Then bowls fill up too much and problem happens again. So basically, no matter where I turn the adjusting nut on the carb bowl, the fuel raises up too much.
I lowered the floats all the way down and turned my fuel pressure down to 4psi to make sure that wasn't the problem.