Welded up dist slots/FBO plate?

Print Thread

Re: Welded up dist slots/FBO plate? [Re: Cab_Burge] #2770530 05/02/20 07:54 PM 05/02/20 07:54 PM
Joined: Jun 2008 Posts: 3,916 usa L lewtot184 master
lewtot184 master L Joined: Jun 2008 Posts: 3,916 usa	welding the outside of the slot duplicates what the factory did to reduce distributor degrees. truth is either side will work but the curve will be a little slower welding the inside. the FBO plate slots are shortened on the outside.

Entire Thread
Subject	Posted By	Posted
Welded up dist slots/FBO plate?	Challenger	04/30/20 05:14 PM
Re: Welded up dist slots/FBO plate?	dragon slayer	04/30/20 05:19 PM
Re: Welded up dist slots/FBO plate?	lewtot184	04/30/20 07:28 PM
Re: Welded up dist slots/FBO plate?	Challenger	04/30/20 07:44 PM
Re: Welded up dist slots/FBO plate?	lewtot184	04/30/20 10:55 PM
Re: Welded up dist slots/FBO plate?	crackedback	04/30/20 11:46 PM
Re: Welded up dist slots/FBO plate?	RapidRobert	05/01/20 12:09 AM
Re: Welded up dist slots/FBO plate?	GTX MATT	05/01/20 12:55 AM
Re: Welded up dist slots/FBO plate?	Challenger	05/01/20 02:26 AM
Re: Welded up dist slots/FBO plate?	dvw	05/01/20 12:02 PM
Re: Welded up dist slots/FBO plate?	lewtot184	05/01/20 12:28 PM
Re: Welded up dist slots/FBO plate?	jbc426	05/01/20 03:19 PM
Re: Welded up dist slots/FBO plate?	lewtot184	05/01/20 03:47 PM
Re: Welded up dist slots/FBO plate?	dvw	05/01/20 04:43 PM
Re: Welded up dist slots/FBO plate?	Dave_J	05/01/20 09:35 PM
Re: Welded up dist slots/FBO plate?	dragon slayer	05/02/20 06:05 PM
Re: Welded up dist slots/FBO plate?	Cab_Burge	05/02/20 08:00 PM
Re: Welded up dist slots/FBO plate?	lewtot184	05/02/20 11:54 PM
Re: Welded up dist slots/FBO plate?	Mattax	05/03/20 02:53 AM
Re: Welded up dist slots/FBO plate?	Mattax	05/03/20 03:11 AM
Re: Welded up dist slots/FBO plate?	Mattax	05/03/20 03:18 AM
Re: Welded up dist slots/FBO plate?	dragon slayer	05/03/20 12:49 PM
Re: Welded up dist slots/FBO plate?	lewtot184	05/03/20 01:14 PM
Re: Welded up dist slots/FBO plate?	Mattax	05/03/20 02:57 PM
Re: Welded up dist slots/FBO plate?	Mattax	05/03/20 03:20 PM
Re: Welded up dist slots/FBO plate?	dragon slayer	05/03/20 03:57 PM
Re: Welded up dist slots/FBO plate?	moparx	05/04/20 04:42 PM
Re: Welded up dist slots/FBO plate?	Cab_Burge	05/04/20 05:47 PM
Re: Welded up dist slots/FBO plate?	dragon slayer	05/05/20 11:10 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To