Originally Posted by Moe
I have an Edelbrock performer RPM so this gasket won't work either?

https://www.manciniracing.com/mara1pivaplk.html


Not unless you cut the heat crossover chamber on the bottom of the intake manifold off. I removed mine with a steady hand and a cut-off wheel so I could weld it back on if needed. You don't need it with most aftermarket heads because they don't have a heat passage. You cant see it anyway when the intake is bolted down twocents

Gus beer


64 Plymouth Savoy
493 Indy EZ's by Nick at Compu-Flow
5-Speed Richmond faceplate Liberty box
Dana 60