4.7L Valve work - having issues

Print Thread

Re: 4.7L Valve work - having issues [Re: Dodgevity] #2766516 04/20/20 09:10 PM 04/20/20 09:10 PM
Joined: Dec 2009 Posts: 21,195 in a cattle trailer down by th... G Guitar Jones Paddle faster! I hear banjo music!
Guitar Jones Paddle faster! I hear banjo music! G Joined: Dec 2009 Posts: 21,195 in a cattle trailer down by th...	Originally Posted by Dodgevity Originally Posted by Dodgevity Tomorrow I'm going to spray a can of CRC GDI Intake valve & turbo cleaner into the intake, run some motor flush through it, then change the oil. Completed all this today. Ran the CRC through the brake booster vacuum hose. After the oil change, I went for a half hour drive on the highway with O/D off, so the higher RPM would blow out any crud on the valves. I reused the motor flush from the truck in a Hyundai, right before I changed the oil in that. Did I mention that I love the quiet cold starts with no lifter clatter. This completes the fix and the truck is running really well. The beast is back and ready for another 200K! Thanks, all What is that Hyundai and how many miles are on it? I'm a Hyundai tech. "Come get your wife" '92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion. '74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Front and rear disc and hydroboost conversion. 2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.

Hop To