440 Source crank drilled for pilot bushing?

Print Thread

Re: 440 Source crank drilled for pilot bushing? [Re: 70VcodeCoronetRT] #2764356 04/15/20 05:56 PM 04/15/20 05:56 PM
Joined: Aug 2003 Posts: 3,095 Idaho Runner master
Runner master Joined: Aug 2003 Posts: 3,095 Idaho	even if its not you can trim your input shaft and use one of these http://www.brewersperformance.com/proddetail.php?prod=PB5300

Entire Thread
Subject	Posted By	Posted
440 Source crank drilled for pilot bushing?	70VcodeCoronetRT	04/11/20 04:22 PM
Re: 440 Source crank drilled for pilot bushing?	Cab_Burge	04/11/20 04:27 PM
Re: 440 Source crank drilled for pilot bushing?	Stanton	04/11/20 04:27 PM
Re: 440 Source crank drilled for pilot bushing?	70VcodeCoronetRT	04/11/20 04:29 PM
Re: 440 Source crank drilled for pilot bushing?	Cab_Burge	04/11/20 04:38 PM
Re: 440 Source crank drilled for pilot bushing?	70VcodeCoronetRT	04/11/20 06:40 PM
Re: 440 Source crank drilled for pilot bushing?	fourgearsavoy	04/11/20 07:26 PM
Re: 440 Source crank drilled for pilot bushing?	8urvette	04/11/20 11:48 PM
Re: 440 Source crank drilled for pilot bushing?	jbc426	04/11/20 04:29 PM
Re: 440 Source crank drilled for pilot bushing?	Runner	04/15/20 09:56 PM

Hop To