oxy/acetylene heating Q - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech oxy/acetylene heating Q

Print Thread

Re: oxy/acetylene heating Q [Re: Dave_J] #2764235 04/15/20 01:09 PM 04/15/20 01:09 PM
Joined: Sep 2003 Posts: 19,598 north of coder moparx "Butt Crack Bob"
moparx "Butt Crack Bob" Joined: Sep 2003 Posts: 19,598 north of coder	the only drawback with using stainless fasteners, is you MUST use [lots of] anti-seize to prevent the threads from galling. just 45+yrs of experience using stainless fasteners.

Entire Thread
Subject	Posted By	Posted
oxy/acetylene heating Q	RapidRobert	04/14/20 02:58 PM
Re: oxy/acetylene heating Q	MR_P_BODY	04/14/20 03:09 PM
Re: oxy/acetylene heating Q	dvw	04/14/20 03:11 PM
Re: oxy/acetylene heating Q	RapidRobert	04/14/20 03:12 PM
Re: oxy/acetylene heating Q	A/MP	04/14/20 03:19 PM
Re: oxy/acetylene heating Q	MR_P_BODY	04/14/20 03:19 PM
Re: oxy/acetylene heating Q	GomangoCuda	04/15/20 09:59 PM
Re: oxy/acetylene heating Q	rickseeman	04/14/20 03:30 PM
Re: oxy/acetylene heating Q	Grizzly	04/14/20 03:45 PM
Re: oxy/acetylene heating Q	RapidRobert	04/14/20 03:45 PM
Re: oxy/acetylene heating Q	moparx	04/14/20 03:51 PM
Re: oxy/acetylene heating Q	Twostick	04/14/20 04:06 PM
Re: oxy/acetylene heating Q	rickraw	04/14/20 05:38 PM
Re: oxy/acetylene heating Q	Hemi_Joel	04/14/20 06:43 PM
Re: oxy/acetylene heating Q	rickraw	04/14/20 07:19 PM
Re: oxy/acetylene heating Q	CMcAllister	04/14/20 07:58 PM
Re: oxy/acetylene heating Q	RapidRobert	04/14/20 08:01 PM
Re: oxy/acetylene heating Q	randavis	04/15/20 03:37 PM
Re: oxy/acetylene heating Q	RapidRobert	04/15/20 03:45 PM
Re: oxy/acetylene heating Q	bobby66	04/15/20 03:59 PM
Re: oxy/acetylene heating Q	Dave_J	04/15/20 04:20 PM
Re: oxy/acetylene heating Q	moparx	04/15/20 05:09 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1