I am assuming that is with the 4.5 bore and a 4.80 bore space.....I have the 605 standard deck (4.5x4.75 stroke), and the pistons are pretty darn near as short as they can go in it...What rod length are they using in that combo?

As mentioned, I would also love to see a 4.90 bore space like the Noonan or AJ blocks where you no longer have the weird inside stubby bolts thru the deck into the valley......I have heard Noonan has/had a billet water block, but its not listed on their site. Would love an almost 670-700 cube NA Hemi in a water block...That would be bad ass..

Cubic inches rule!

Last edited by Dragula; 02/22/20 04:34 PM.
'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk