Acceptable spring pressures with 2 and 4 groove locks

Print Thread

Re: Acceptable spring pressures with 2 and 4 groove locks [Re: lewtot184] #2744791 02/19/20 10:45 PM 02/19/20 10:45 PM
Joined: Jan 2003 Posts: 1,292 Tucson AZ, M MadMopars OP pro stock
MadMopars OP pro stock M Joined: Jan 2003 Posts: 1,292 Tucson AZ,	Originally Posted by lewtot184 factory 2 piece valves? That's a possibility... Although, I believe they were replaced at one point they do look similar to a factory valve in design. Assuming that's the case, does that become a high risk at these pressures? [img]https://s9.postimg.cc/6fbjxzfvv/48-2016-_Drag-_Weekend-_Best-_Burnouts-lpr.jpg[/img] 73 GTX 4407278 3/4 69 DART GT 4404 SPEEDDANA 73 ROAD RUNNER 4514 SPEEDDANA 64 F100 3834 SPEED9" 75 DODGE D300 4404 SPEEDDANA 99 DODGE RAM 3500 4X4 DUALLY... ON 38"s

Entire Thread
Subject	Posted By	Posted
Acceptable spring pressures with 2 and 4 groove locks	MadMopars	02/19/20 09:31 PM
Re: Acceptable spring pressures with 2 and 4 groove locks	Cab_Burge	02/20/20 01:04 AM
Re: Acceptable spring pressures with 2 and 4 groove locks	lewtot184	02/20/20 01:21 AM
Re: Acceptable spring pressures with 2 and 4 groove locks	MadMopars	02/20/20 02:45 AM
Re: Acceptable spring pressures with 2 and 4 groove locks	MadMopars	02/20/20 02:52 AM
Re: Acceptable spring pressures with 2 and 4 groove locks	lewtot184	02/20/20 03:02 AM
Re: Acceptable spring pressures with 2 and 4 groove locks	John_Kunkel	02/20/20 06:25 PM
Re: Acceptable spring pressures with 2 and 4 groove locks	Mr PotatoHead	02/20/20 06:28 PM
Re: Acceptable spring pressures with 2 and 4 groove locks	Cab_Burge	02/20/20 06:30 PM
Re: Acceptable spring pressures with 2 and 4 groove locks	MadMopars	02/22/20 05:47 PM

Hop To