Originally Posted by mopararmy
Originally Posted by Twostick
Originally Posted by mopararmy
Originally Posted by fast68plymouth


If your headers are angle plug friendly, and it’s in the budget..... the 75cc E Streets make a lot of sense.

Crower 271HDP cam

11” converter


Looks like I might get the e-streets and the thinnest gasket. I haven’t pulled the heads and measured deck height but I used .140 and hoping it’s better than that. 8.8:1 is what I got in a calculator based off 75cc head, .027 gasket, and .140 in the hole piston.
I forgot to mention I have power brakes so I think that rules out the whiplash from what I’ve read. Also, 91 is the highest octane anywhere close. I still would rather not change out the converter and gears.


An electric vacuum pump solves your power brake issue.

Kevin


True.
There’s a guy pretty local to me that knows his stuff. I’ll see what he thinks on some of the cams mentioned here. If it’s a cam that needs degreed then he would be the one to install it anyways. I don’t have the tools for it.


ALL cams need to be degreed. Too many valve timing critical manufacturing steps that can be messed up that can't be seen without accurate measurements.

Kevin