Ok ANOTHER update.

The van was apart for a couple days. No battery installed. I removed the computer to get the part number from it.

I put it all together today so the other mechanic can have a complete vehicle to diagnose.

So I put it together, and now it has ground from the PCM but no crank signal from the key to crank it over.

Checked all the wiring at the PCM and everything still “looks” good.

When I replaced the ignition switch, the end that goes into the switch from the keyed portion, looked great. Not broken or rounded/worn.

I’m still at a loss, and super frustrated I cannot figure this out!!!!