Originally Posted by pittsburghracer
Originally Posted by XXHEMI
Originally Posted by Jeremiah
Amazing car! Do they typically run factory carbs (i.e. AVS, AFB, Holley 4160 etc) or can you cheat and use an Edelbrock or holley hp place of the OEM carb?


Everything but the block is supposed to be factory OEM parts with correct part numbers. You can do what ever possible to make your parts better as long as they keep there stock appearance.

I do not treat the tires. I shave them down to the wear bars and start burning em up from there. A good set of tires are priceless!






So you are saying it’s an aftermarket block with stock pistons, cranks, rods, cams, intake manifolds, carbs, etc etc, but they can use a tire and compound that is modified. If so that’s super fast for that combo. Even for Fall type weather at an east coast track. Congratulations


i think they can use stroker cranks, different rods and pistons, but the heads have to appears stock, the intake has to be stock, same with carbs and exh manifolds...
cam is whatever they want to run, but not sure if it has to sound stock???