It took a couple years but this was built for my Dad as a driver with a little attitude...

72 Duster Body...frame tied with US Car Tool rails...

It's pretty complete so curb weight should be close to what stock was...No cage and no Fiberglass

3500 convertor...4.11 gears...275/60 M/T ET Streets on the rear...

M1 intake with a 750 Holley...

MSD ignition...coil...distibutor with timing at 36 degrees

Doug's 453 headers...

RVMB 727 transmission...

Engine is a 73 340 block bored .030
Decked .018 for 0 deck
ARP main studs
Mopar cast 4” crank
CAT H-beam Rods
Diamond dished pistons
Promaxx Stage 3 heads

Sorry...I don't know any cam specs...

It ran 11.20s @ 119 in the previous owners 70 Dart with w-2 heads...3350# with a 4000 converter and 4.10s with the headers open...

It's going down as-driven with closed exhaust to the back bumper...

Maybe an 11.40???