Originally Posted by gregsdart
The rods are going to be BME 6.815 ALUMINUM 396 FORGINGS... the bearings will be sbc width, ...BME made the rod bodys mopar rod width with the sbc bearings centered...I HAVE THE SAME ROD IN MY 484S/R NOW BUT AT 6.7"...FOR YOUR RPM/POWER LEVEL I'D PROBABLY UPGRADE TO A GRP BECAUSE THE BME '396' FORGING ISN'T AS STRONG.
The other things i think i need are to upgrade to .180 wall piston pins from .150 ...AGREED YOU ARE AT A LEVEL WHERE .185 WALL PINS WILL PROBABLY HELP