I’m doing a oil cooler replacement on a 2012 Wrangler 3.6. Figured I would change the pcv while in there.

Has anyone done this???

It’s on the back side of the passenger valve cover, along with the trans fill tube, main wiring harness, and fuel tank evap line. Even if you removed these I’m not sure it’s possible.

I have the drive bit ratchet...low profile. No help. Can’t get it on either of the two bolts. #25 Torx. Access from below would be a possibility except for the cat. Figured oh well, pop the valve cover, install the pcv then reinstall, but no, the pcv rides around the back of the exhaust cam, so that’s not an option.

Am I missing something? On a transverse minivan this would be easy. This ain’t easy!